This class is for highly modified stock appearing four wheel drive race vehicles. Competition chassis, race bodies and high performance race engines allowed.
1) Any type of stock appearing truck or Jeep body allowed (must be
recognizable per tech approval)
2) Body must extend to and cover all front engine components
3) A firewall and floorpan must be present protecting driver from engine and
driveline components
4) Center seat acceptable, must be located no more than 84” from centerline of
front axle to the seat back
5) Windshield not required
1) The main frame of the chassis must be constructed of minimum 2 X 3 steel
or OEM frame from front to rear. Round tube can be used for additional bracing.
2) Minimum 8 point roll cage required
3) Any type suspension allowed
4) Any style OEM or aftermarket chain or gear drive transfer set ups allowed
5) Dual independent master cylinder brake system required
6) Four independent wheel brakes required
7) Maximum 46” DOT tires with alterations (Cuts) allowed
8) 2800 lbs big block, 2500 lbs small block
9) Maximum wheelbase 130”
1) Any automotive type engine acceptable
2) Engine must be located with # 1 spark plug no more than 12” behind the center
of the front axle tube
3) No aluminum engine blocks
4) Any type of cylinder head and intake manifold allowed
5) Dual carbs allowed gas or alcohol (split Dominators allowed)
6) Vacuum pumps and dry sump allowed
7) Nitrous allowed
Vehicles must meet all safety requirements.